deposited steel

英 [dɪˈpɒzɪtɪd stiːl] 美 [dɪˈpɑːzɪtɪd stiːl]

网络  熔敷钢

机械



双语例句

  1. Adhesion and corrosion resistance of diamond-like carbon deposited on stainless steel
    类金刚石薄膜在不锈钢表面结合强度及耐腐蚀性研究
  2. Nanostructured chromium oxide coatings were deposited on stainless steel by using a plasma spraying system with an axial powder feeding unit.
    普通等离子喷枪外径向送粉,粉末利用率低,采用轴向送粉等离子喷涂系统在不锈钢上制备了纳米氧化铬涂层。
  3. In modern operations tin is generally deposited on the steel plate by electrolytic action.
    要现代工艺中,一般是用电镀法将锡镀在钢片上。
  4. Hardness of DLC Films Deposited on Stainless Steel
    不锈钢衬底上沉积类金刚石薄膜的硬度
  5. Effects of Metal Cr Barrier on the Performance of Flexible Cu ( In, Ga) Se_2 Solar Cells Deposited on Stainless Steel Substrate
    金属Cr阻挡层对柔性不锈钢衬底Cu(In,Ga)Se2太阳电池性能的影响
  6. Ni-PTFE nano-composite coatings were deposited on A3 carbon steel substrate using brush electro-plating technique.
    利用电刷镀技术在A3钢基底上制备了Ni-PTFE纳米复合镀层;
  7. The separation of silver from gold was carried out by dissolution of the silver deposited on the steel wool with nitric acid.
    用硝酸溶解钢棉上的银,从而实现金银分离。
  8. Ti ( CN) Layer Deposited on Tool Steel by PCVD Technique
    PCVD法在模具钢表面沉积Ti(CN)涂层的研究
  9. Boron carbide coatings were deposited onto stainless steel via vacuum plasma spraying ( VPS), and then their phase composition, microstructure, deposition efficiency, bonding strength and laser irradiation resistance were examined.
    采用真空等离子喷涂技术,在不锈钢基体上制备碳化硼(B4C)涂层,并对涂层的组成、结构、沉积效率、结合强度以及抗激光辐照性能进行了表征。
  10. Chromium oxide thin film was deposited on stainless steel by arc ion plating ( AIP).
    采用电弧离子镀方法在不锈钢基体上沉积Cr2O3薄膜。
  11. Iron base composite coatings were deposited on mild steel substrate by arc spraying using cored wire with TiC ceramic powders.
    采用电弧喷涂含TiC陶瓷粉末的粉芯丝材,在低碳钢基体上制备了铁基复合涂层。
  12. Corrosion Behavior of Zn Electro-Pulse Deposited Mild Steel
    20钢表面电脉冲沉积锌层及其耐蚀性能
  13. This paper introduces the characteristics, process and operation conditions of cleaning carbonate scale deposited on the steel heat exchanger.
    本文介绍了钢制换热器碳酸盐垢的特点、清洗工艺及操作控制条件。
  14. A study of SiC films deposited onto stainless steel as hydrogen permeation barrier
    不锈钢表面沉积SiC作为氢渗透阻挡层的研究
  15. The gold and silver were deposited on the steel wool in electrowinning of the eluted pregnant solution with the recoveries of these two metals 99% or so.
    解吸贵液通过电解,使金和银沉积到钢棉上,电沉积率99%左右。
  16. Using ion-plating technology, a Cu-Pb alloy solid lubricating film is deposited on steel and cast iron.
    我们采用离子镀技术在钢铁材料表面沉积Cu&Pb合金固体润滑膜。
  17. Factors affecting adhesion between magnetron sputter deposited stainless steel coating and a carbon steel substrate
    影响磁控溅射不锈钢粘附性的因素
  18. Titanium coatings have been deposited onto 317L stainless steel plate by low pressure plasma spray ( LPPS) process.
    采用低压等离子喷涂工艺,在317L不锈钢质接骨板上喷涂了钛涂层,制备出钛涂层的接骨板.通过动物的植入实验,研究了这种接骨板的生物相容性;
  19. The effects of a Cr diffusion barrier on the performance of flexible Cu ( In_xGa__ 1-x) Se_2 ( CIGS) solar cells deposited on stainless steel ( SS) substrate are investigated.
    研究了Cr扩散阻挡层对柔性不锈钢衬底Cu(InxGa1-x)Se2(CIGS)太阳电池性能的影响。
  20. Diamond-like carbon ( DLC) films were deposited on stainless steel substrates at atmospheric pressure and low temperature ( 60 ℃) by electrolysis in a methanol solution with a pulsed power supply.
    采用脉冲直流电源,以甲醇有机溶液作为碳源,在常压60℃的条件下,采用电化学沉积方法在不锈钢表面制备了类金刚石碳薄膜。
  21. MoS_2/ Mo gradient coatings with different Mo contents were also deposited on steel substrates, which were realized by adjusting initial power of Mo target with 30 W, 90 W and 120 W, respectively.
    用磁控溅射方法在钢基体上制备MoS2/Mo梯度镀层,调整金属Mo靶的初始电源功率30、90、120W来改变梯度镀层中Mo的含量。
  22. With electrophoresis method, oriented purple membrane films are deposited on stainless steel electrode to construct a photoreceptor with the structure of stainless steel/ purple membrane/ gel/ copper electrode.
    用电泳法在不锈钢电极上沉积出定向紫膜薄膜,构成不锈钢/紫膜/凝胶/铜电极结构的光接收器。
  23. Ni-P functionally gradient deposits and Ni-P deposits with different P contents were deposited on steel substrates by electrodeposition method. The wear behaviour of two types of Ni-P deposits was investigated comparatively.
    采用电沉积技术在钢表面制备了Ni-P功能梯度镀层和不同磷含量的Ni-P镀层,对比考察了2种镀层的磨损性能。
  24. The CN_x/ TiN multilayer composite coatings were deposited onto stainless steel substrates by combination of DC reaction magnetron sputtering deposition with multi-arc plating.
    采用多弧-磁控溅射镀膜机在不锈钢2Cr13衬底上沉积CNx/TiN多层复合涂层。
  25. The ( Ti, Al, Zr) N super-hard reactive films have been deposited on high-speed steel substrate by multi-arc ion plating technology and under condition of cathodic targets of Ti-Al-Zr alloys with different compositions.
    利用多弧离子镀技术、采用Ti-Al-Zr合金靶材在高速钢基片上沉积(Ti,Al,Zr)N超硬反应膜。